NB694UH Replaced Remote fit for Sanyo FWDV225F DVD VCR Combo Player, Replacement works for Funai MAGNAVOX DVD Player & VHS NB693 NB693UH NB695 NB695UH MDV260V MDV260V/F7 Trouble Shooting: 1.No response or does not work: 1)Solution:please try to Install 2pcs new AAA alkaline batteries after you receive the remote control. 2)Please make sure your DVD Player VCR Combo model number in the list. 3)Please make sure there is no block in front the remote control and DVD Player VCR Combo. The control range is 10 meters, 30 degrees to 0 degrees. 2.After all If the remote still does not work or response to your DVD Player VCR Combos Solution: please help to try the following trouble shooting steps: 1)Remove the batteries from the remote. 2)Press every button on the remote at least 3-5 second time to drain any residual power. This also helps to check for stuck buttons. 3) kindly please help to check whether the IR sensor area of your DVD Player VCR Combos is clean, sometimes the dust will effect the IR sensor connection. 4) kindly please make sure nothing is blocking on the front of your DVD Player VCR Combos, make sure it does not have any barriers between your DVD Player VCR Combo and remote; please point the remote control toward the remote control sensor on the DVD Player VCR Combos. 5) Insert 2pcs new AAA alkaline batteries into the remote, please do not use AAA batteries, please do not use rechargeable batteries. Make sure the batteries are correctly installed with the positive and negative ends in the right direction. The correct battery installed way is + to - ; - to + polarity. If install opposite, the remote should not work. 6) Unplug the power supply of your DVD Player VCR Combos and then plug it back to restart it. Then try the remote again.