Baridwon recliner replacement parts are Compatible with most furniture brands, but not all brands. Such as Raymour & Flannigan, Wickes, Rooms Go, Conns's, Bobs store, Bassett, and more. NOTICE:The recliner replacement parts are not suitable for all furniture. Before you buy them, you need to know whether the size of your old handle and how long the cable you currently, is similar to ours.Make sure you have the right measurements. The only tools that you need are a cross-point screwdriver and needle-nose pliers. PACKAGE INCLUDES:2 x Plastic Recliner handle replacement2 x Recliner cable replacement Specifications: Recliner handle replacementMaterial: PlasticColor: BlackThe large face of oval handle: 4-3/8" by 2-5/8" Specifications: Recliner cable replacementMaterial: MetalColor: BlackTotal length: About 38.2in/97cm (This isn't an important length. It can be as long or longer than your previous cable and work fine.)Exposed Length: About 4.72in/12cm (This is an important length. Critical Length for the cable as long as this length is similar it will work regardless of your recliner.) INSTALLATION STEPS: 1. Extend the footrest to relieve tension on the release handle, pull the release lever to access the 2 screws. 2. Remove screws, gently pull/pry the broken handle assembly out. Notice exactly which hole the cable connects to. 3. Pinch the bracket where the cable is mounted and remove the cable.4. Replace with the new one in reverse of these directions and voila your back in business.