CARPRO DQUARTZ GO Nano Diamond Quartz Fusion Coating: Ceramic Coating for Cars, Professional-Grade Coating in DIY Package, Increase Surface Hardness - (50ml Kit)

DQUARTZ GO 50ml Nano Diamond Quartz Fusion Coating. A single coat will blow your mind with years of protection, beads, gloss, and ease of maintenance! Features & Specifications: Durable. Hard. Slick to the touch. Versatile. 50ml Kit. Primary Applications: Automotive paint. Most metals. Home appliances. Precautions: Do not apply in direct sun or on hot surface. Keep away from children Do not re-use 4" suede applicators. Do not re-use the towels you used to buff off with on paint. Wear hand protection. Wear respiratory protection such as a painters mask. Directions: -Wash, decontaminate, mechanically polish, and panel wipe the paint. -Wrap 4" microfiber suede around the grey side of applicator block or simply use our MF applicator. -Shake bottle. -Point away from your face and slowly open bottle. Then drag one or two lines of product along length of applicator. -Wipe evenly across 2 Sq Ft +/- section in criss cross or overlapping motion using light and even pressure. -Wait 5 ~ 15 minutes (depending on temperatures and flash time) before wiping. -Once it feels slightly tacky, gently wipe off with a CARPRO 2Face Microfiber Towel. -Be sure to remove all excess residue and only then move to the next section. -NOTE: Always test ONE section first and make sure you understand application before proceeding. -Flip or switch out to new 4" suede every 1 ~ 2 panels or if residue or dirt becomes visible. -1 layer of DQ GO is enough, but if you wish to apply an extra layer, you may do so after 1 hour from the time you began the first layer. -Repeat application process starting in the same panel and moving the same direction around the vehicle. -Keep out of the elements for 48 hours for best performance and durability.